Planar Monolithics Industries, Inc.
7311-G Grove Road Frederick, MD 21704 USA

Tel: 301-631-1579 Fax: 301-662-2029
E-mail: sales@planarmonolithics.com
ISO 9001:2000 Certified

 
   HOME | CONTACT | SEARCH |


PMI IS NOW ISO CERTIFIED!

Planar Monolithics Industries, Inc. is very proud to announce that effective December 17, 2003 PMI has become ISO 9001:2000 Certified for the following scope of registration: Research, Development, Custom Design and Manufacture of RF/ Microwave Components, Super Components and Subsystems, in the DC to 40 GHz Frequency Range.  Please click here to see PMI's ISO Certificate.


 

PMI MODEL NUMBER: SLVAC-0102-70M OPT: LA

 
The Model SLVAC-0102-70M OPTION LA is a Miniature Successive Detection Log Video Amplifier (SDLVA) Implemented with Wideband Hybrid MIC/MMIC Technology operating over the 120 MHz to 200 MHz bandwidth and able to detect noise in the 10 MHz to 1 GHz range.


Specifications:

  Frequency Range 130 to 190 MHz
  Dynamic Range +5 dBm to -65 dBm
  RF Input Impedance 50 ohms
  Input VSWR 1.8:1, 1.5:1 Typical
  Maximum Power 15 dBm
  Load Impedance 93 ohms
  Log Video Output Impedance Source Impedance ≤1 ohm
  Log Video Output Voltage @-60 dBm +375 mV 100 mV
at 160 MHz @ 0 dBm +1.875 V 100 mV
  Log Video Linearity 1 dB @ 25 degrees C
1.5 dB over Operating
Temperature Range
  Log Video Baseline -75 dBm Minimum
  Tangential Sensitivity -72 dBm Minimum
  Log Video Versus Frequency 1 dB
  Log Video Versus Temperature 2.25 dB
  Log Video Rise Time 32 nS Maximum
  Log Video Fall Time 35 nS Maximum
  Log Video Bandwidth 15 MHz to 30 MHz Maximum
  RF Output VSWR 2.5:1
  RF Output Impedance 50 ohms
  Limited RF Output Level +2 dBm 1 dBm
  Limited RF Output Phase Versus Amplitude 0.3 degrees / dB
  Phase Tracking Versus Frequency Any two units shall track within 2 degrees
  DC Power +5V 0.25V @ 100 mA, -5V 0.25V @ 200 mA
  DC Power Supply Protection +6.5 V Maximum, -6.5V Minimum

 

Available Options:

Please contact the factory for additional options.

 

Environmental Ratings:

 

Our standard environmental ratings are as follows, for specific requirements please contact us...
 Temperature:  -40C to +71 C Operating
 -65 C to +100 C Non-Operating
 Humidity:  MIL-STD-202F, Method 103B Cond. B
 Shock:  MIL-STD-202F, Method 213B Cond. B
 Vibration:  MIL-STD-202F, Method 204D Cond. B
 Altitude:  MIL-STD-202F, Method 105C Cond. B
 Temperature Cycle:  MIL-STD-202F, Method 107D Cond. A

 

 

Outline Drawing:

Click here to see an outline drawing of SLVAC-0102-70M OPT: LA

 

Product Feature:

Product Feature on SLVAC-0102-70M OPT: LA

 

Test Report:

Test Report on SLVAC-0102-70M OPT: LA

 

Test Data (06/19/01):

Test Data on SLVAC-0102-70M OPT: LA

 

More Test Data (02/07/05):

More Test Data on SLVAC-0102-70M OPT: LA

 

More Test Data (04/01/05):

More Test Data on SLVAC-0102-70M OPT: LA

 

More Test Data (12/07/05):
More Test Data on SLVAC-0102-70M OPT: LA
 

More Test Data (02/08/06):

More Test Data on SLVAC-0102-70M OPT: LA

 

More Test Data (02/01/07):
More Test Data on SLVAC-0102-70M OPT: LA

 

More Test Data (09/20/07):
More Test Data on SLVAC-0102-70M OPT: LA

 

Press Release:

Press Release on SLVAC-0102-70M OPT: LA3

 

Press Release:

Another Press Release on SLVAC-0102-70M OPT: LA3

 

Acceptance Test Procedure (ATP):
Acceptance Test Procedure on SLVAC-0102-70M OPT: LA

 

Mean Time Between Failures (MTBF) Analysis:

Mean Time Between Failures (MTBF) Analysis on SLVAC-0102-70M OPT: LA

 

 

 

Qual Approval for ATP (08/29/07):

Qual Approval for ATP

 

Qual Approval for Reliability Prediction (09/04/07):
Qual Approval for Reliability Prediction

 

Qual Approval for Qualification by Similiarity (09/27/07):
Qual Approval for SLVAC-0102-70M OPT: LA

 

 

 

Acceptance Test Procedure (ATP) on Standard SDLVA Chip:

Acceptance Test Procedure (ATP) on Standard SDLVA Chip

 

Further Information:

Click here to view our short form page on our Successive Detection Log Video Amplifiers