IFM SUBSYSTEM

6.0 TO 18.0 GHz 65 dB DYNAMIC RANGE

TWO LOG VIDEO AMPLIFIER OUTPUTS PULSE WIDTH OF 100 nS MINIMUM

THREE FREQUENCY DISCRIMINATOR VIDEO OUTPUTS

 

SPECIFICATIONS ON PMI RECEIVER FRONT-END IFM SUBSYSTEM

FREQUENCY RANGE

: 6.0 TO 18.0 GHz

  OTHER FREQUENCIES AVAILABLE.

 

 

PMI MODEL No: RSM-618-65

IS A 6.0 TO 18.0 GHz, 70 dB DYNAMIC RANGE, RECEIVER FRONT-END IFM SUBSYSTEM.  THE DEVICE HAS BOTH DLVA AND SDLVA LOG OUTPUTS AS WELL AS THREE DC-COUPLED LINEAR FREQUENCY DISCRIMINATOR VIDEO OUTPUTS.  THE DEVICE PROVIDES FIVE ANALOG OUTPUTS FOR THE INTERPOLATION OF THE RF INPUT SIGNAL.

SDLVA & DLVA VSWR : 3.0:1 Maximum @ -20 dBm, 2.5:1 Typical
TSS

: -68 dBm Minimum

RISE TIME

  (10% TO 90% RF)

: 25 nS Maximum, 20 nS Typical

RECOVERY TIME

: 350 nS Maximum, 250 nS Typical
INPUT DYNAMIC RANGE

: -65 dBm to 0 dBm Minimum

  -65 dBm to +5 dBm Typical

PULSE WIDTH

: 100 nS Minimum (-65 dBm to 0 dBm)

FREQUENCY FLATNESS

  (DLVA)

: 2.5 dB Maximum, 1.75 dB Typical

LOG SLOPE

: 25 mV/dB (10% Tolerance)
LOG LINEARITY : 2.5 dB Maximum, 1.75 dB Typical

FREQUENCY DISCRIMINATOR

  VIDEO OUTPUTS

: 3 OUTPUTS:

  6-10 GHz, 10-14 GHz, 14-18 GHz

FREQUENCY DISCRIMINATOR

  SLOPE (10%)

: 50 mV/GHz

FREQUENCY DISCRIMINATOR

  ACCURACY

: 300 MHz Maximum

  200 MHz Typical

RF INPUT POWER : +15 dBm
POWER SUPPLY

: +15 vdc @<950 mA (800 mA Typ.) No Load

   -15 vdc @<400 mA (275 mA Typ.) No Load

CONNECTORS

: SMA FEMALE for Input & Output

  Solder Pins for DC & Ground

SIZE

: 7.0" x 6.0" x 1.5"

  SMALLER SIZES AVAILABLE.

WEIGHT : < 3.0 lbs.

OPTIONS ARE AVAILABLE FOR:

    OTHER FREQUENCIES AVAILABLE.

     OTHER SIZES, DYNAMIC RANGES & DC POWER SUPPLIES ALSO.

     CUSTOM ELECTRICAL AND MECHANICAL SPECIFICATIONS AVAILABLE.

 

PLANAR MONOLITHICS INDUSTRIES, INC., SPECIALIZES IN MANUFACTURING HIGH QUALITY,

SPEC COMPLAINT, MILITARY AND COMMERCIAL GRADE, MICROWAVE FREQUENCY

RF COMPONENTS.  PLEASE CONTACT THE FACTORY TO DISCUSS YOUR SPECIFIC REQUIREMENTS.

 

FUNCTIONAL BLOCK DIAGRAM

RECEIVER FRONT-END (RECEIVER SUBSYSTEM MODULE), PMI MODEL NO: RSM-618-65

 

 

 

MECHANICAL OUTLINE

RECEIVER FRONT-END (RECEIVER SUBSYSTEM MODULE), PMI MODEL NO: RSM-618-65

 

 

 

 

 

 

PLANAR MONOLITHICS INDUSTRIES, INC., 7311-G GROVE ROAD, FREDERICK, MD 21704

TEL: 301-631-1579 FAX: 301-662-2029 E-MAIL: sales@planarmonolithics.com

WEBSITE: http://www.planarmonolithicsindustries.com